Section 1: replacements and installations, Replacing the lower housing assembly, Installing the lower housing assembly – Kodak E User Manual

Page 4: Replacements and installations

SERVICE MANUAL

30APR96 – SM4530-1

Section 1: Replacements and Installations

Replacing the LOWER HOUSING ASSEMBLY

Warning

Dangerous Voltage

[1] Disconnect the main power.

[2] Remove the PROJECTION LENS.

[3] Remove the LAMP MODULE ASSEMBLY.

[4] Remove the 6

Torx SCREWS (for N.P. models) (or 6 Phillips SCREWS for Painted Models) from the LOWER

HOUSING ASSEMBLY.

[5] Pull the LOWER HOUSING ASSEMBLY off the TOP HOUSING.

Installing the LOWER HOUSING ASSEMBLY

[1] Do the replacement procedure for the LOWER HOUSING ASSEMBLY in reverse order.

A100_0012HA

LAMP MODULE

LOWER HOUSING

SCREW (6)

A100_0012HCA

This manual is related to the following products: