Konica Minolta X50 - Manual (Page 86)

86 D ATA - TRANSFER MODE
DISCONNECTING THE CAMERA FROM A COMPUTER
Windows XP, 2000 Professional, and Me
To disconnect the camera, click once on the unplug-or-eject-hardware icon
located on the task bar. A small window opens indicating the device to be
stopped.
When more than one external device are connected to the computer, repeat the
procedure above except right click on the unplug-or-eject-hardware icon. This will open
the unplug-or-eject-hardware window after clicking on the small window indicating the
unplug-or-eject-hardware routine.
Click on the small window to stop
the device; the safe-to-remove-
hardware window opens. Click on
“OK” to close the window, turn the
camera off, and then disconnect
the USB cable.
Confirm that the access lamp is not lit. Turn the camera off, and then disconnect the USB
cable.
Windows 98 / 98 Second Edition
Never disconnect the camera when the viewfinder lamp is lit - the data or memory
card may permanently be damaged.