Konica Minolta X50 - Manual (Page 101)

101
If the camera does not function normally, turn it off, remove and reinsert the battery, or
unplug and reconnect the AC adapter set. Always turn the camera off using the main
switch otherwise the memory card may be damaged and camera settings reset.
Pictures are
not sharp.
Subject is too close.
Make sure the subject is within
the autofocus range (p. 26) or
use the macro mode (p. 30).
A special situation is
preventing the autofocus
system from focusing (p.
27).
Use the focus-lock function to
focus on an object at the same
distance as the subject (p. 26).
Pictures are
taken indoors
or in low-light
situations with-
out flash.
Slow shutter speeds
result in blurred images
when the camera is
hand-held.
Use a tripod, change the cam-
era sensitivity to a higher setting
(p. 46), or use the flash (p. 28).
The subject is beyond the flash
range (p. 46).
Move closer to the subject or
change the camera sensitivity to
a higher setting (p. 46).
Focus signal is
red.
While using
flash, the pic-
tures are too
dark.
ABOUT THE LITHIUM-ION BATTERY CHARGER CORD
The included AC cord is designed for the current of the sales region. Only use the cord
in the region it was purchased.
Region Product code
Continental Europe, China, Korea, Singapore (220-240V) APC-110
Great Britain, Hong Kong (220V-240V) APC-120
United States, Canada, Taiwan (110V-120V) APC-130
Japan (100V) APC-140