Konica Minolta X50 - Manual (Page 74)

74 S ETUP MODE
LANGUAGE
The language used in the menus can be
changed. The language is selected in section 1
of the setup menu (p. 70).
Highlight the current menu language in the
setup menu and press the center button of the
controller to open the language screen.
AUDIO SIGNALS
Every time a button is pressed, an audio signal gives a
positive confirmation of the operation. The audio signals
can be turn off in section 2 of the setup menu (p. 70). Two
audio signals are available.
LCDbrightness
Format
Language English
File # memory
Folder name
English
Deutsch
Japanese
Español
Chinese
Français
:sel. :enter
Enter
Use the four-way key of the controller to
highlight the new menu language.
Press the central button of the controller to set
the language.
Audio signals
Focus signal
Shutter FX
Volume
Power off 1
1
1
2
3 min.
FOCUS SIGNAL
When the shutter-release button is pressed partway down, an audio signal confirms the
AF system has focused. The focus signals can be changed or turned off in section 2 of
the setup menu (p. 70). Two tones are available.