Konica Minolta X50 - Manual (Page 75)

75
SHUTTER FX
When the shutter is released, a shutter sound effect
will give a positive confirmation of the operation. The
sound effect can be turn off in section 2 of the setup
menu (p. 70). Two shutter effects are available; signal
1 is mechanical and signal 2 is electrical. The
mechanical shutter sound was taken from the
legendary Minolta CLE, a compact rangefinder that
represents the pinnacle of the development of the
Leitz-Minolta CL.
VOLUME
The volume of the audio signals and shutter FX can be increased or decreased in section
2 of the setup menu (p. 70). This affects the camera’s audio signals only and will not
change the playback levels of an audio track.
AUTO POWER SAVE
To conserve battery power, the camera shuts down if an operation is not made within a
certain period. To restore power, press the shutter-release button or playback button. The
length of the auto-power-save period can be changed in section 2 of the setup menu (p.
70): 1, 3, 5, 10, and 30 minutes. The length of the auto-power-save period is fixed at 10
minutes when the camera is connected to a computer or PictBridge printer.