Konica Minolta X50 - Manual (Page 15)

15
INSERTING THE BATTERY
This digital camera uses one NP-700 lithium-ion battery. Before using the battery, read
the safety warnings on pages 3 and 4 of this manual. When replacing the battery, the
camera should be turned off (p.19).
1
1.Slide the battery-chamber door toward the front of the camera to release the safety
catch. Open the door.
2.Slide the battery into the battery chamber with the battery terminals first.
3.Close the battery-chamber door and slide it toward the back of the camera to engage
the safety catch.
After installing the battery, the set-time/date message may appear on the monitor, see
page 20 on how to set up the clock. An internal battery protects the clock, calender, and
memory settings for more than 24 hours if the camera is used for at least 5 minutes
before removing the battery.
2 3