Konica Minolta X50 - Manual (Page 72)

The formatting function is used to erase all data on a
memory card. Before formatting a memory card, copy the
data to a computer or storage device. Locking images will
not protect them from being deleted when the card is
formatted. Always format the memory card using the
camera; never use a computer to format a card.
When the format option is selected and entered in section 1 of the setup menu (p. 70), a
confirmation screen appears. Choosing “Yes” formats the card, choosing “No” cancels
the formatting operation. A message appears to indicate the card has been formatted.
If the unable-to-use-card message appears, the inserted card in the camera may need to
be formatted. A memory card used in another camera may also have to be formatted
before being used.
72 S ETUP MODE
The brightness of the LCD monitor can be set in eleven levels. The brightness setting
screen is opened from section 1 of the setup menu (p. 70).
LCD MONITOR BRIGHTNESS
FORMATTING MEMORY CARDS
Set LCD brightness
:adjust :enter
Low High
Use the left/right keys of the controller to adjust
the brightness, the monitor image changes
accordingly. Press the central button of the
controller to set the brightness level.
When a memory card is formatted, all data on the
card is erased.
LCD brightness
Format
File # memory
Folder name
Language
–
–
Off
Std. form
English