Kathrein MSK 24 - Manual (Page 32)

Sat measurement
32
Example
Call up Simple DiSEqC:
Press buttons [2ndF] [SAT-CTRL]
Press button [3] to call up DiSEqC control.
SAT-CTRL menu
The cursor must be positioned on the left with the [-] button. Press button
[0] or [1] to call up the Simple DiSEqC menu.
DiSEqC menu
Press [ENTER] to send the control command. The > symbol indicates
that the control command has been sent. Press button [1] to switch to
data burst.
Simple DiSEqC menu
0
SAT-CTRL LNB=1
V-SEC=2 DiSEqC=3
DiSEqC-Framing
DiSEqC-SIMPLE
0 Tone BURST >