Kathrein MSK 24 - Manual (Page 18)

Sat measurement
18
Sat measurement
Standard Switch-Over
In the SAT mode the MSK 24 can be set to receive the following types of
signal:
•
analogue and
•
digital (DVB).
Overview of commands in Standard Switch-Over in SAT
[2ndF] [STD] Call up standard switch-over menu:
[1]...[2] Select the standard
1 = analogue
2 = digital (DVB)
Example
Call up digital (DVB) standard:
Press [2ndF] [STD]
LC display:
•
1 = analogue standard
•
2 = digital (DVB) standard
Standard menu
If you press button [2], you will leave the standard menu and the receiver
will be set to DVB measurement.
A "D" appears in the display.
Display for DVB measurement
0
1=ANALOG
2=DIGITAL(DVB)
FR:1288.0MHz SAT
LEV: 66.5dBuV D
л