Menu system – Kenwood XXV-01D User Manual
Page 46
46
|
English
Menu system
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1
Select AMP Control mode
Push the Control knob towards [
4] or
[
¢].
Select the "AMP Control" display.
2
Enter AMP Control mode
Press the Control knob for at least 1 second.
3
Select the AMP Control item for adjustment
Push the Control knob towards [FM] or [AM].
• For the details on the AMP Control item, see the
Instruction manual attached to the LX AMP.
4
Adjust the AMP Control item
Push the Control knob towards [
4] or
[
¢].
5
Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
News Bulletin with Timeout Setting
The tuner automatically changes when a news
bulletin starts even if the radio is not being
listened to. Also, you can set the time interval
when interruption is prohibited.
Display and Setting
"News: OFF"
"News: 00min"
…
"News: 90min"
When you set "News: 00min" — "News: 90min",
the News Bulletin Interrupt function is ON.
When the news bulletin starts, "NEWS " is
displayed, and the tuner changes to the news
bulletin.
• If you choose the "20min" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
• The news bulletin volume is the same level that was
set for
• This news bulletin function is only available if the
desired station sends PTY-code for news bulletin or
belongs to
sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, the
tuner changes to an FM station.
In Tuner mode
Local Seek
Only stations whose reception is good are
searched in auto seek tuning.
Display
Setting
"Local.Seek: OFF"
The local seek function is OFF.
"Local.Seek: ON"
The local seek function is ON.
In Tuner mode
Tuning Mode
Sets the tuning mode.
Tuning mode
Display
Operation
Auto seek
"Seek Mode:
Auto1"
Automatic search for a station.
Preset station seek
"Seek Mode:
Auto2"
Search in order of the stations
in the Preset memory.
Manual
"Seek Mode:
Manual"
Normal manual tuning control.
AF (Alternative Frequency)
When the reception is poor, automatically
alternate to another frequency broadcasting the
same program in the same RDS network with
better reception.
Display
Setting
"AF: ON"
The AF function is ON.
"AF: OFF"
The AF function is OFF.
When the AF function is ON, the "RDS" indicator
is ON.