Kenwood XXV-01D User Manual
Page 29
English
|
29
Station Preset Memory
Putting the station in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob towards [
4] or
[
¢].
3
Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to
9).
4
Select a preset number
Turn the [VOL] knob.
5
Put the frequency in the memory
Press the [VOL] knob for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] number.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.
• When the
ON, only RDS stations are put in the memory.
• When Auto Memory Entry is done in the FM2 band,
the RDS stations preset in the FM1 band are not put in
the memory.
Likewise, when Auto Memory Entry is done in the FM3
band, RDS stations preset in FM1 or FM2 are not put
in the memory.
Preset Tuning
Recalling the stations in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Show the Multi-function display
Press the [NEXT] button repeatedly until "1"
— "6" appears.
Refer to
9).
3
Select a preset number
Turn the [VOL] knob.
4
Recall the station
Press the [VOL] knob.