General features, Text display switching – Kenwood XXV-01D User Manual
Page 22
22
|
English
General features
Display Type C/ Display Type D
Text Display Switching
Changing the text display.
1
Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to
9).
2
Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
3
Select the display mode
Turn the [VOL] knob to select "Mode".
Press the [VOL] knob.
4
Select the display Type
Push the Control knob towards [
4] or
[
¢].
Select the "Display Type C"/"Display Type D"
display.
5
Enter text select mode
Turn the [VOL] knob to select "Text".
Press the [VOL] knob.
6
Select the text display part
Select the display mode
Press the Control knob.
Each time you push the knob, the display mode
alternates between the display modes shown in
the table below.
Display Type C
Display Type D
a
1
2
3
4
5
1
2
3
4
6
b
1
2
3
4
1
2
3
4
6
c
1
1
6
a Source display and 2-item display
b 4-item display
c 1-item 4-row display
1 1st text display part
2 2nd text display part
3 3rd text display part
4 4th text display part
5 Indicator display part
6 Icon display part
Select the row
Push the Control knob towards [FM] or [AM].
The cursor (
Ü) moves to the selected text display
part.
Select the text
Push the Control knob towards [
4] or
[
¢].
Refer to the table described later for setting
items.
7
Exit Display Control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
• Same information cannot be displayed in 1st – 4th
text display part. However, the blank display is able to
have multiple selections.
• * If the contents of the information cannot be
displayed, either of the following is displayed:
– In the 1st text display part
1 , the play time or
frequency is displayed.
– In other modes, blank is displayed.
• *¹ If the contents of the information cannot be
displayed, "No Name" is displayed.
• *² If the contents of the information cannot be
displayed, "No Text"/"None"/"Obscure Audio" is
displayed.
• When LX-AMP is connected, the item setup by the
Display mode of LX-AMP is displayed. (Other than 1-
item 4-row display
c)
• Setting in some rows cannot be changed during
interrupt mode (e.g., traffic information).