Kenwood XXV-01D - Manual (Page 42)

42 | English
Menu system
Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1 Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2 Select the menu item
Push the Control knob towards [ 4] or
[ ¢].
Example: When you want to set the beep sound
select the "Beep" display.
3 Set the menu item
Push the Control knob towards [FM] or [AM].
Example: When you select "Beep", each time you
push the knob it alternates between
"Beep: ON" or "Beep: OFF". Select 1 of
them as the setting.
You can continue by returning to step 2 and
setting other items.
4 Exit Menu mode
Press the [MENU] button.
• When other items --those applicable to the basic
operation method above--are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
( etc.) are entered step
by step.
In Standby mode
Security Code
Because authorization by the Security Code is
required when the audio unit is removed from
the vehicle, personalizing this unit by using the
Security Code is helpful in preventing theft.
• Setup Security Code when the
Setting> (page 49) is set as OFF.
VOL MENU SRC Control knob