Kenwood KVC-1000 - Manual (Page 6)

English
6
Monitor Control Function
3Switching the AV Output Picture
Each time you press the V.SEL button for one second
or more, AV output picture switches as follows:
▼
NORMAL : Picture selected from the TV control
screen(Page 15)
▼
TV : Picture of television
▼
VD2 : Picture input from the front AV-IN
terminal
The unit will not operate when the "IN-OUT" switch is
set to “IN” (Page 32).
3Switching to the Angle/Screen Control
Screen
Pressing the SCRN button will cause the angle
control screen(monitor angle adjustment mode) or
screen control screen (screen adjustment mode) to
be displayed on the TV or video picture (Page 7).
3Turning the Monitor Picture Off
Hold down the SCRN button for two seconds or
more to turn the monitor’s picture off.
The picture reappears when the one of the SCRN,
FNC, MODE or V.SEL buttons is pressed.
3Switching to the Source Control Screen
Press the FNC button to switch to the source control
screen (Page 15-27).
3Changing the Background of the Source
Control Screen Picture
Each time you press the FNC button, you can select
the background between 5 different patterns for the
source control screen and menu screen.
3Adjusting the Volume
When the KTC-1000R/A907 is not connected to
the system
Press the
5 button to increase the volume of the
built-in speaker.
Press the
∞ button to decrease the volume of the
built-in speaker.
When the KTC-1000R/A907 is connected
Press the
5 button to increase the volume of the
KTC-1000R/A907.
Press the
∞ button to decrease the volume of the
KTC-1000R/A907.
NOTE
NOTE
AUDIO VISUAL TOUCH PANEL
MULTIPLE SOURCE CONTROL
MODE
SCRN
V.OFF AV OUT SEL.
FNC V.SEL
KVC-1000 6.5-inch WIDE COLOR LCD TELEVISION
MODE SCRN
FNC V.SEL
Audio input terminal (AV-IN 2) (3.5ø-Stereo)
Video input terminal (AV-IN 2) (3.5ø-Monaural)