Kenwood KVC-1000 - Manual (Page 20)

English
20
FM/AM Tuner Control Function
3Traffic Information Function
You can listen to traffic information. If you are
listening to discs, they will continue playing until
a traffic bulletin is broadcast.
Turning TI function On/Off:
Touch [ TI ] on the control screen to turn the function
on and off.
When the function is on, the TI indicator is turned on.
When a traffic information station is received, the TI
indicator blinks.
If you are listening to a disc when a traffic bulletin
begins, playback will be interrupted. When the
bulletin ends or poor reception causes signal losses ,
the disc will continue to play again.
Switching to a Different Traffic Information Station:
Use [ 4 ] / [ ¢ ] to make an auto seek of the TI
stations in a certain band.
• When you are listening to a disc, you cannot change
to another TI station.
• When the auto TP seek function is turned on and
reception starts to weaken, the tuner automatically
seeks stations with better reception.
• If you are tuned to a station that is not a traffic
information station itself but which provides EON
services, you can still have traffic information
received.
3Presetting the Volume for Traffic
Information/News
Preset the volume to be used when traffic
information/news starts to be broadcast.
Tune into the station for which you want to set the
volume.
Adjust the volume to the desired level.
Keep touching [ TI VOL ] for two seconds or more.
The volume level that the data has been stored.
Future traffic information broadcasts are heard at
the preset level.
• The volume cannot be lowered by this function
during tuner reception. The volume is only set when
it is louder than the listening volume of the tuner.
• You can arrange only to listen to traffic information
/news bulletins with at preset volume with the
volume set at minimum.
3Returning to the Tuner Control Screen
(Main)
Touch [ ] to return to the tuner contorl screen
(Main).
NOTE
3
2
1
NOTE
Tuner Control Screen (Shift)