Kenwood KVC-1000 - Manual (Page 32)

English
32
Installation
Connections
M 4
IN OUT
NAV
I / F
ILLUMI
ACC
PRK SW
BATT
– +
CAR DIVERSITY ANTENNA WITH BOOSTER CX-A330
ON
OFF BOOST
CAR DIVERSITY ANTENNA WITH BOOSTER CX-A330
ON
OFF BOOST
MASTER
SW
Battery cable (Yellow) ª12V
Ignition cable (Red) ª12V
Fuse (5A)
Automatic illumination control
cable (Orange)
Parking sensor cable (Green)
To parking brake detection switch harness
of car
For the sake of safety, be sure to connect
the parking sensor.
2 CAUTION
To car headlight switch
Ignition key switch
Car fuse box
(Main fuse)
ACC
Ground cable (Black) · (To car chassis)
Battery
Audio/Visual Input or Output
•
Visual (Yellow)
• Audio left (White)
• Audio right (Red)
When disconnecting the I/F cable,
pull on the connector’s ring.
2CAUTION
Kenwood navigation unit
KTC-1000R/A907
C907
When the KTC-1000R is connected,
see the KTC-1000R Instruction
Manual
NOTE
KVC-1000
Accessory 3
Accessory 6
Accessory 1
Accessory 2
IN-OUT setting
•Set to "IN" when using a video
player or when connecting a
navigation unit other than
Kenwood.
•Set to "OUT" when connecting to
another monitor.
NOTE
Connection cable
(Provided with the C907)
Connection cable
(Provided with the KTC-1000R/A907)
MASTER SW cable (White/Red)
When not connected to the KTC-1000R/A907,
this cable should be connected to
·.
The unit will not operate unless the cable is
connected.
2 CAUTION