Kenmore 790.4658 - Manual (Page 12)

12
Cook
Time
Timer
Set/Off
Oven
Preheat
Door Locked
STOP
Clear
Bake Broil
Warm &
Hold
Bake
Oven
Lockout 3
Delay
Start
Select
Clean
Control Pad Functions
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
BROIL PAD—
Used to select the
variable broil
function.
UP and DOWN ARROW PADS— Used
along with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time
of day, clean time and minute timer. BAKE PAD—
Used to select the
bake function.
DELAY START
PAD— Used to set
the desired start
time for baking &
Self-Clean. May be
used with COOK
TIME to program a
delayed bake
cycle.
COOK TIME
PAD— Used to
enter the length of
the baking time.
SELECT CLEAN
PAD— Used to
select the Self-
Cleaning cycle. A 2,
3 or 4 hour Self-
Clean time may be
selected.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN"
light will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-Clean
cycle or when the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
FEATURE INDICATOR
LIGHTS— These light to
show which feature is in
use. CLOCK SET
PAD— Used
to set the
time of day.
STOP/CLEAR
PAD— Used to
clear any function
previously entered
except the time of
day and minute
timer. Press STOP/
CLEAR to stop
cooking. Also the
STOP/CLEAR pad
is used to activate
oven door lockout
setting.
TIMER SET/OFF PAD—
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking. Also,
TIMER SET/OFF pad is
used to set the Continuous
Bake feature.
OVEN INTERIOR
LIGHT PAD—
Used to turn oven
interior light ON or
OFF.
WARM & HOLD
PAD— Used to set
the Warm & Hold
feature.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold Delay
Start
. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return to normal sound operation, press and hold Delay
Start
again for 7 seconds until the
control beeps once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press Broil . "— —" appears in the display.
2. Press and hold the until "HI" appears in the display.
3. Press and hold Broil until °F or °C appears in the display.
4. Press the or to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat
indicator light turns OFF, your oven has reached the set temperature.