Alarm, Automatic dimmer function, Display font setting – Kenwood Z919 User Manual

Page 12: Switching the round indicator for the sound level, General features

— 12 —

English

General features

The display dims when the car's lights are turned on.

The dimmer function is not available for units if the dimmer wire
is not connected.

NOTE

Automatic Dimmer Function

You can change the font used on the display.

Changing the display font:

Press the S.A button for at least one second to toggle between
the normal font and funky font.

Display Font Setting

You can change the display mode of the round sound level
indicator to the left of the display.

Changing the round sound level indicator:

Press the S.A button to cycle through the round sound level
indicator as shown below:

• You cannot switch the round sound level indicator when Silent

display in the function set is on.
Set Silent display in the function set to off before you change
the round sound level indicator.

• You cannot switch the round sound level indicator when the

clock display is in the stopwatch mode and the timer mode.

NOTE

ANDROMEDA

PULSAR

RIPPLE

COSMOS

THE POLESTAR

COMET

Switching the Round Indicator for the Sound Level

You can use the clock as an alarm. The alarm will beep on the
time set.

Press the CLK button to select the alarm mode.
Once the alarm mode is selected, "ALARM" will be displayed.

Time Setting:

Press the ADJ button for at least two seconds.
"ALARM ADJ" is displayed, and you can set a time for the alarm.

You can adjust hours with the FM/AM button, and minutes with
the

4/¢ button.

To set the minute to "00"

Press the S/S button for at least one second to set the minute to
"00".
Pressing this button while the minute is below "30" rounds it off,
and while the minute is "30" or more rounds it up.

Press the CLK button to end the time setting for alarm.

To start the alarm
Press the S/S button to switch the alarm on and off.
When you turn the alarm on, the

indicator will light up.

When the time set in the step 3 has come
The alarm will beep for 15 seconds.
You can immediately stop the beep by pressing the S/S button,
or leave it without any action for about 15 seconds.

NOTE

Alarm