Stopwatch, Timer – Kenwood Z919 User Manual

Page 11

— 11 —

To set the time to "0:00"

Press the S/S button for at least one second to return the time to
"0:00".

Press the CLK button to end the time setting for timer.

To start the timer
Each time you press the S/S button, the timer will start and
stop.

When you start the timer, the

indicator will light up and the

time counting will start.

If you want to clear the setting time of the timer

Press the S/S button for at least one second.
Then the setting time of the timer will return to the time set in the
step 3.

When the time set in the step 3 has passed
The timer will beep for five seconds.
You can immediately stop the beep by pressing the S/S button,
or leave it without any action for about 5 seconds.

NOTE

You can use the clock as a stopwatch.

Press the CLK button to select the stopwatch mode.
Once the stopwatch mode is selected, "STOP WATCH" will be
displayed.
When you enter the stopwatch mode, the round sound level
indicator changes its display to indicate the stopwatch mode.

To start the measurement
Press the S/S button.

To stop the measurement
Press the S/S button.

If you want to clear the time

Press the S/S button for at least one second.
Then the time indication will return to "0:00'00"0".

To restart the measurement
Press the S/S button to restart the measurement.

NOTE

Stopwatch

You can use the clock as a timer. Once you set a time, the timer
will beep when the set time has past.

Press the CLK button to select the timer mode.
Once the timer mode is selected, "TIMER" will be displayed.
When you enter the timer mode, the round sound level indicator
changes its display to indicate the timer mode.

Time Setting:

Press the ADJ button for at least two seconds.
"TIMER ADJ" is displayed, and then you can set a time for the
timer.

You can adjust hours with the FM/AM button, and minutes with
the

4/¢ button.

Timer