Kingston Technology Bay Networks 2000 User Manual
Page 55
Changing Hardware Configurations
49
Note that the first few times you remove the front bezel it might seem to
resist removal. This is simply because the pins and snaps are new. After a
few times, removal is easier. Sliding the top cover back is optional; it allows
you to get a better grip on the front bezel for removal.
Remove the Switch front bezel as follows:
1.
Optionally, remove the three screws at the top rear of the chassis,
then slide the top cover back.
2.
Slide your fingers between the front bezel and the Switch.
3.
Pull forward firmly.