Kingston Technology Bay Networks 2000 - Manual (Page 44)

Rack Mounting 38
Sliding Rails (Optional)
The following illustration shows the optional sliding rail assembly that
enables you to slide the Switch out of the rack and lift off the top cover for
interior access. Note that the sliding rail kit is optional and is separately
orderable.
NOTE : You must have a four-post rack to use the sliding rail mount assembly,
and the rack must be at least 20-inches deep.
Optional extender brackets and hardware are provided in case your rack is
deeper than 20 inches. Attach the extender brackets to the sliding rails.
Bay Networks recommends that you have two people available when
installing the sliding rail assembly. The job is easier when one person holds
the rail brackets to the rack sides while the other person secures the
brackets to the rack. A second person is again necessary when sliding the
chassis into the rails.