Windows nt 4.0 – Kingston Technology Bay Networks 2000 User Manual
Page 40
Managing the Switch
33
Windows NT 4.0
To install the Bay Networks Extranet Access Client onto a Windows NT 4.0
PC, you must first copy and install the Extranet Access Client (Eac_10d.exe)
that is on the Bay Networks Extranet Switch CD in the Client folder.
1.
Install Eac_10d.exe by double-clicking on the program name. The
installation is self-explanatory. As prompted at the end of the
installation, reboot your system.
2.
Install the Remote Access Service under the Network Control Panel
(click the Start menu button, select Settings
→
Control Panel, then
double-click on the Network icon to open the Network Control Panel).
Select the Services tab and click on Add. Scroll down to select
“Remote Access Service” and click OK.
3.
Under the Protocols tab, verify that NetBEUI is not installed. If
NetBEUI is listed, click on it, then click on the Remove button. This
will force the Network Neighborhood to use NetBIOS over TCP/IP,
which is compatible with the Switch. Click the OK button and reboot
your system.
4.
Double-click on the Extranet Connection Manager icon.
A.
Enter a new Connection Profile Name.
B.
Create a new Dial-up Connection.
C.
Click the Tool button (next to the Dial-up Connection list box),
select New, and follow the wizard.
D.
Create a new Extranet Connection.
E.
Click the Tool button (next to the Extranet Connection list box),
select New IPsec Connection, and follow the wizard.
F.
Click the Connect button.