Kenwood DM-SG7 - Manual (Page 34)

DM-SG7(EN)
34
Editing
1
Select the “Q.MOVE”.
Moving several tracks at a time
(QUICK MOVE)
Use the following procedure to change the cur-
rent order of tracks by selecting a desired order
and moving the tracks together. (up to 255 tracks)
Preparation ¶ Enter the stop mode.
2
Select the track you want to move.
1 Select a track number.
2 Set it.
7
4 ¢
To decrease
track No. To increase
track No.
SET
3 Repeat steps 1 and 2 above.
¶ Pressing the 1 ¡ key allows to check the current
order of tracks.
¶ Pressing the CLEAR/DELETE key allows to cancel the
last selected track only. (To erase previously selected
tracks, press the EDIT key and restart from the begin-
ning.)
( − dB)
MANUAL
0 0 3 0 4 ? ?
R
L ∞
3 0 1 30 10 5
/ 0 = >
( − dB)
MANUAL
Q . M O V E ?
R
L ∞
3 0 1 30 10 5
( − dB)
MANUAL
0 0 1 / 0 0 1 ?
R
L ∞
3 0 1 30 10 5
= >
Track No. to be moved
Selected track No.
2 Select the “Q.MOVE”.
3 Set it.
4 ¢
: Keys and control used in the op-
erations described on this page.
1 Press the EDIT key .
EDIT
SET
¶ Editing is aborted if no operation has been performed for
8 seconds.
Each press of the 4 ¢ keys switches the operation.
1 Q.MOVE
2 Q.ERASE
4 End the selection of the group to be moved.
ENTER
CURSOR/CHECK