Kenwood DM-SG7 - Manual (Page 21)

DM-SG7(EN)
21
Programming
Programming
1
Let the “PGM” indicator light.
Use the following procedure to program desired
tracks in a desired order. (up to 32 tracks)
Preparation ¶ Load a disc.
¶ Enter stop mode.
¶ Up to 32 tracks can be programmed. More than 32 tracks
cannot be selected.
¶ If you made a mistake, press the CLEAR/DELETE key
and enter the track No. again.
¶ An extremely short track cannot be programmed.
¶ “
– ✽ ✽ : ✽ ✽ ” is displayed when the total programmed
period has attained 256 minutes or more.
Programming tracks in a desired order
3
Start playback.
¶ When the 4 or ¢ key is pressed during playback,
tracks will be skipped in the direction of the pressed key.
¶ The input operation is aborted if the P.MODE/CHARAC-
TER key is not pressed while the track number indicator
is blinking.
Press numeric keys in the following order.
To select track No. 12: Press in order of
0, 2 then
the P.MODE/CHARACTER key.
1 Select the track number to be played.
7
P.MODE
CHARACTER
( − dB)
TOTAL SINGLE
- - - - 0 : 0 0
R
L ∞
3 0 1 30 10 5
PGM
A ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
7 8 9
QZ f , F H I
+100 0 +10
& / i j
3
“PGM” lights up
2 Set the input track number.
P.MODE
CHARACTER
( − dB)
0 1 2 P - 0 1
R
L ∞
3 0 1 30 10 5
PGM
Selected track Programmed order
: Keys and control used in the operations de-
scribed on this page.
2
Select track numbers in the order you want to play them.
3 Repeat steps 1 and 2 above.