Kenwood DM-SG7 - Manual (Page 30)

DM-SG7(EN)
30
1 SINGLE(+) : Elapsed time of a track.
2 SINGLE(–) : Remaining play time of a track.
3 TOTAL(+) : Total elapsed time of the MD.
4 TOTAL(–) : Total remaining time of the MD.
5 REMAIN
: Remaining recording time of disc.
6 TITLE : Disc title indication (at the time of stop)/
Track title indication (at the time of play-
back).
In record mode
1 SINGLE(+) : Elapsed recording time of the track
being recorded.
2 TOTAL(+) : Total elapsed time at the time of re-
cording.
3 REMAIN : Remaining recording time of disc.
TIME DISPLAY key
Each press switches the time display modes.
Changing the displayed contents
TIME
DISPLAY
Each press switches the mode.
TEXT DISPLAY key
This key allows to switch the mode of time display.
When a disc corresponding to CD-TEXT is inserted into a system-connected CD player (DP-SG7), the
recorded text information (data) at the same time can be read in and displayed on the side of this unit.
1 CD TEXT flashes (CD-TEXT display mode)
2 CD TEXT not lit (MD display mode)
¶ “BLANK DISC” is displayed if the disc does not contain
any recording.
(“NO TRACKS” is displayed if the disc has a title.)
( − dB)
REMAIN TOTAL SINGLE
0 0 1 - 1 : 2 3
R
L ∞
3 0 1 30 10 5
DIGITAL 1 2
CD TEXT
One will light.
Indication of the remaining time
1 Select the CD input on the amplifier.
2 Stop the CD and the MD.
3 Select “DIGITAL 1” with the REC INPUT key.
§
4 Press the TEXT DISPLAY Key.
REC
INPUT
TEXT
DISPLAY
¶ The text information (data) is cleared when the disc is
removed from the CD player or when the MD REC
INPUT is switched.
DIGITAL 1 2 REPEAT
( − dB)
SINGLE
0 0 1 0 : 0 1
R
L ∞
3 0 1 30 10 5
Lights up
Display after operation
TEXT LOAD : Data loading
CAN'T LOAD : Loading not possible p
( − dB)
T I T L E
R
L ∞
3 0 1 30 10 5
DIGITAL 1
CD TEXT
“CD TEXT” blinks.
At the time of stop : The disc title is displayed.
At the time of playback : The track title is displayed.