KVH Industries TracVision 4 - Manual (Page 84)

Maintenance Port Parser Commands
54-0150 91
F.6 Installation Commands
Set/Report GPS Position
Function: reports or sets default GPS position
Command: GPS
GPS,XX,D,YYY,E
Response: GPS = XXD YYYE
GPS: XXD YYYE
Where: XX = latitude (0-90)
D = S (South) or N (North)
YYY = longitude (0-180)
E = E (East) or W (West)
Report Satellite Names
Function: reports names for satellites A and B
Command: SATINSTALL
Response: SATINSTALL,,
Report Tracked Satellite
Function: reports name of satellite currently being tracked
Command: SAT
Response: SAT =
Report Configured Satellite Names
Function: reports names for all configured satellites
Command: SATLISTA
Response: SATLISTA,,...,
Report Valid Satellite B Selections
Function: reports names for all valid Satellite B selections for
a given Satellite A selection
Command: SATLISTB,
Response: SATLISTB,,
...,
Install Satellite Pair
Function: installs satellites A and B as the satellite pair
Command: SATINSTALL,,
Response: If valid pair, echoes the input data
If invalid pair, returns error message
Table F-6
Installation Commands