Krell Industries 7.1 - Manual (Page 69)

Krell Home Theater Standard 7.1 65
System Configuration, continued
Program Remote,
continued
Follow these steps to program your learning remote:
1. Press the front panel level buttons (30) to select a command.
The command appears on the front panel display window (24).
2. Place the programmable remote in program mode (see the
learning remote user manual).
3. Place the infrared sensor of the programmable remote so that it
faces the infrared emitter (17) on the Home Theater Standard
7.1 front panel.
4. Press and hold the save button (29) on the Home Theater
Standard 7.1 front panel until the programmable remote has
learned the code (see the learning remote user manual for infor-
mation on the time needed to learn the code).
5. Select and save as many commands as desired.
6. Press the recall button (31) on the front panel to return to
Program Remote Screen A. Then press the previous key on the
Home Theater Standard 7.1 remote control to return to the oper-
ation screen.
The
SYSTEM INFORMATION
menu displays AC line frequency, the version
of software that your component is currently using, and information
about the
EEPROM .
Select
SYSTEM INFORMATION
from the
OPERATION
menu. The
SYSTEM
INFORMATION
screen appears.
System Information Screen
System Information
KRELL HTS
-SYSTEM INFORMATION-
AC/LINE FREQUENCY:
SOFTWARE VERSION:
EEPROM VERSION:
EEPROM TYPE:
60 HZ
2.3
5
2
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.