Krell Industries 7.1 - Manual (Page 13)

Krell Home Theater Standard 7.1 9
8 VCR Button and LED
Use this button to select the VCR device.
9 TV Button and LED
Use this button to select the television device.
10 CD Button and LED
Use this button to select the compact disc device.
11 Tuner Button and LED
Use this button to select the AM/FM tuner device.
12 Aux1 Button and LED
Use this button to select an auxiliary device, such as phono, tape, or
an additional DVD, LD, CD, or VCR.
13 Aux2 Button and LED
Use this button to select a second auxiliary device, such as phono,
tape, or an additional DVD, LD, CD, or VCR.
14 Tape/VCR2 Button and LED
Use this button to playback pre-recorded tapes. You may also use
this button to compare the output signal of an analog tape recorder to
an audio source. See Tape Input and Output, on page 71.
15 Main Zone and Zone 2 Button
Use this button to select either main zone or zone 2 device control.
This button also acts as a zone 2 power button when the main zone
power is off. See Main Zone and Zone 2 Operation, on page 72.
16 Main Zone and Zone 2 LEDs
The Home Theater Standard 7.1 has two zones for controlling
sources: main zone and zone 2. Above each source selection button
are two LEDs, one red and one green. The red LED illuminates
when the input is engaged and the source is playing in the main
zone. The green LED illuminates when the input is engaged and the
source is playing in zone 2.
17 Infrared Emitter
Emits the Home Theater Standard 7.1 remote operation code to a
learning remote. See Program Remote, on page 64.
Front Panel Description, continued
Device Selection
Buttons and LEDs,
continued