Kodak HR 500 - Manual (Page 28)

Connecting and Operating the Scanner
2-10 August 2001
Inserting a Negative or Mounted Slide in the
Scanner
Select the appropriate film holder for the negative or mounted slide you will be
scanning.
Preparing a Carded Negative
IMPORTANT: For best focus, use the film holder that is closest to the size of the
opening in the aperture card.
1. Lift the film holder’s magnetic sheet.
2. With the emulsion side toward the rear of the scanner, locate the carded
negative on the film holder’s two pins.
3. Carefully close the magnetic sheet over the carded negative.
Continue with Placing the Film Holder in the Scanner on page 2-12.
P192_0021AC
carded
negative
film holder
magnetic
sheet
pin
emulsion
side