Kodak 9020/CINE - Manual (Page 70)

MECHANISM FRAME and LENS MOUNT
1 . Remove the UPPER HOUSING. See page 4-1.
2 . Remove the CENTER HOUSING. See page 4-4.
3 . Remove the 4 SCREWS and the TRANSFORMER. See page 4-11.
4 . Remove the SCREW and disconnect the NEUTRAL WIRE.
5 . For Model 5020, 9020 and 9020/CINE remove the SCREW, the AF PCB and the 2 CONNECTORS from
the AF PCB.
6 . Lift the MECHANISM FRAME and LENS MOUNT and remove the 3 CONNECTORS J 3, J 10, J 12.
See page 4-19.
SCREW
LENS MOUNT
MECHANISM
FRAME
SCREW (4)
TRANSFORMER
NEUTRAL WIRE
AF PCB
figure 4-17
Service Manual SM2547-1
03/98 4-12 Kodak AG, Stuttgart