General information 1-3, Service tools 1-3, For models 4020/5020/7020/9020 and 9020/cine 1-3 – Kodak 9020/CINE User Manual
Page 11: General information -3, Service tools -3, For models 4020/5020/7020/9020 and 9020/cine -3, General information service tools
1. GENERAL INFORMATION
Service Tools
Use the following tools to repair a KODAK EKTAPRO Slide Projector:
TORX Screw Driver size 206
TORX Screw Driver size 210
TORX Screw Driver size 215
or TORX bits TL-3255
TORX Screw Driver size 220
Logic Probe
TTL/CMOS
Oscilloscope
- only for checks on the AUTO FOCUS PCB.
Digital Multimeter
Voltage
5 to 240 V AC
0 to 50 V DC
Current
1 to 100 mA DC
Accuracy: 1%
0,1 to 2 A DC
0,1 to 5 A AC
The multimeter should have RMS capability
Accuracy
1%
Fixture Tool
622 0454
For Models 4020/5020/7020/9020/9020/CINE
PLCC Extractor Tool
TL-4430
Service Computer
100% IBM compatible
Hard disk
CGA/EGA/VGA Monitor/Display
1 RS 232 Serial Interface
1 Centronics Printer Interface
1 720kB Floppy Disk Drive
1 9pin Serial Interface CORD
Diagnostic Software:
TL-4575
Ejector Microcontroller G 990 3250
SM 2547-1
Service Manual
Kodak AG, Stuttgart
1-3
03/98