Kodak 9020/CINE - Manual (Page 19)

EKTAPRO Model 7020
Features and Functions:
All features and functions as Model 4020.
Additional features:
Application Slot : for Kodak and OEM ADAPTERS
Bus CONNECTORS (RS232) : IN (female) and OUT (male)
Address Switch : 16 addresses can be selected
Initializing procedure : After power on the Projector the SLIDE LIFTER and the RING DRIVE
will be checked, the LAMP and the FAN will be switched off
High Light : 20% more light output, lamp life time approx. 30% reduced
NEW (only on Models 7020/9020)
If the parallel Mode “970*” is set on the IR Remote Control it is possible to toggle with “666*” between two
projectors to control the focus functions. These functions are only visible on the screen.
figure 2-3
SM 2547-1 Service Manual
Kodak AG, Stuttgart 2-5 03/98