Konica Minolta Magicolor 5430 DL - Manual (Page 68)

Network Printing 62
Printing via IPP (Internet Printing Protocol) – Windows
Server 2003/XP/2000
Adding an IPP Port
There are two ways to add an IPP port under Windows Server 2003/XP/2000:
Using setup.exe or using the Add Printer wizard.
Using setup.exe
Double-click setup.exe in the drivers\english\W2k-xp folder on the Utilities
and Documentation CD-ROM. (Unless otherwise noted, all dialog boxes
pictured here are taken from a Windows XP operating system.)
1
In the second dialog box select the Net-
work Printer radio button and then
choose OK.
2
In the Printer text box of the next dialog box
enter the printer’s network pathname in one
of the following formats and then choose
OK:
„
http://ipaddress:80/ipp
„ http://ipaddress:631/ipp
„ ipp://ipaddress:80/ipp
„ ipp://ipaddress:631/ipp
If you enter an invalid pathname, the following error message displays
(depending on your Windows operating system). Choose OK to return to
the previous dialog box and then type a valid pathname.
„
Windows Server 2003/XP—“Windows cannot connect to the printer.
Either the printer name was typed incorrectly, or the specified printer
has lost its connection to the server. For more information, click Help.”
„ Windows 2000—“Could not connect to the printer. You either entered
a printer name that was incorrect or the specified printer is no longer
connected to the server. Click Help for more information.”