Kyocera FS-5900C - Manual (Page 35)

22
Setup
■ Loading Label
For detailed information on labels, refer to page 114.
1 Set the media thickness switch ( ☞ P. 19).
2 Adjust the media guides to the width of the label sheets.
3 Load label stock into the multi-purpose tray, positioning the sheets
so that the top edge feeds into the printer first and the printable
side is facing up.
The height of the labels should not exceed the limit mark on the paper guide.
4 Open the printer driver’s Paper tab, then pull down the Paper Source
menu and select Label .