Kenwood XD-753 - Manual (Page 28)

28
Basic section
1. Load a cassette tape.
(Recording is available on deck B only.)
2. Select the tape transport direction.
Let's record
Recording on TAPE
1 Open the cassette holder
of deck B.
2 Insert a tape.
3 Close the door.
1 Select deck B by pressing the
TAPE B key.
2 Press the TAPE B key so that
the desired direction indicator
appears.
™
3 Stop playback (by pressing the
7 key).
To reverse the transport direction
÷
When recording is started, the
tape is transported in the direction
selected in this step.
÷
Wind the tape to the position
where recording is to be started.
3. Set the recording condition.
Select the reverse mode.
ª
÷
The Tape Equalizer cannot be used in recording.
Note that this cassette deck cannot record onto
Metal tapes.
Note Note Note
÷
Differentiation between normal
(TYPE ) and high (TYPE ) tape is
set automatically.
÷
Remove tape slack before load-
ing.
PUSH
OPEN
1 1
REVERSE
MODE
3 3
2 2
A
5 5
3 3
4 4 2 2
1 1