Kenwood XD-753 - Manual (Page 25)

25
Basic section
Let's have sound
CHANNEL
SPACE freq.
Area
1
2
USA, Canada and South
American countries
Other countries
FM : 100 kHz
AM :
10 kHz
FM : 50 kHz
AM : 9 kHz
The space between radio channels has been set to the
one that prevails in the area to which the system is
shipped. However, if the current channel space setting
does not match the setting in the area where the sys-
tem is to be used, for instance when you move from
area 1 or area 2 shown in the following table or vice
versa, proper reception of AM/FM broadcasts cannot
be expected. In this case, change the channel space
setting in accordance with your area by referring to the
following table.
1 Select the TUNER input.
2 While holding the TUNER (BAND) key de-
pressed, turn the MULTI CONTROL jog dial to
select the system mode.
÷
The “AM” display is variable depending on the model
(country or area), and “MW” may be displayed in
some areas.
1 “FM100/AM10 kHz” STEP,
2 “FM 50 /AM 9 kHz” STEP,
F 0 M 1 0 0 / A M 1 F 9 M 5 0 / A M
MU
LTI CONTROL
CHANNEL SPACE setting
(Except for the U.S.A., Canada, U.K., Europe, and Australia)