Kenwood XD-753 - Manual (Page 16)

16
Preparation section
This unit incorporates a clock function. Be sure to adjust to the correct time before using the timer
function. The time can be displayed only while the power is off.
1
Select “Clock Options”.
2
Select “Adjust Time”.
3
Adjust the hour.
4
Adjust the minute.
Clock adjustment
÷
The time display starts to blink.
÷
Press the SELECT key. The hour is entered and the
minute display starts to blink.
Example: Adjustment to 8:45
The following items can be selected by turning the
MULTI CONTROL jog dial.
“Sleep Timer”
“Adjust Time”
“Timer Play”
“Auto Power Save”
To decrease
the figure To increase
the figure
(Other countries)
AM12
ÔAM1ÔAM2...
PM1 ÔPM2...ÔAM12 ...
00 Ф01Ф02...59Ф00Ф01...
ч
Press the BACK key to return to the previous step and
restart operation from there.
÷
To adjust correct time, press the ENTER key at the same
moment as a time announcement.
To decrease
the figure To increase
the figure
+Scrolled display (Clock Options)
(In standby mode) ÷
The clock display blinks after the power cord has been
unplugged from the AC power outlet and plugged in
again or after a power failure. In this case, set the time of
the day again.
(Displayed for approx. 5 sec.)
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Program Play”
“Recording Options”
“Tape Dubbing”
“Audio Options”
“Clock Options”
“Language Options”
(For U.K. and Europe)
0
Ф1Ф2...13Ф14...Ф0 ...
(Other countries) (For U.K. and Europe)
To display the time
MENU
SELECT
SELECT
SELECT
ENTER
C i l o c k O p t
0 8 : 0 m 8 : 0 0 a
5 8 : 4 m 8 : 4 5 a
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL
MU
LTI CONTROL