Kenwood DPX-302 - Manual (Page 13)

13
XD SERIES (En)
Preparation
This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function. The time is displayed
only while the power is off.
1
Switching the power ON.
2
Select “Clock Options”.
3
Select “Adjust Time”.
4
Enter the figure of hour.
5
Enter the figure of minute.
Clock adjustment
÷ The time display starts to blink.
÷ Press the SELECT key. The hour is entered and the minute
display starts to blink.
Example: Adjustment to 8:45
The following items can be selected by turning the
MULTI CONTROL jog dial.
“Sleep Time”
“Adjust Time”
“Timer”
To decrease the
figure To increase
the figure
AM12 ÔAM1ÔAM2...
PM1 ÔPM2...ÔAM12 ...
00 Ф01Ф02...59Ф00Ф01...
ч By turning the Jog dial and displaying "Return," you can return
to the previous step and do a procedure over again.
÷ To adjust correct time, press the ENTER key at the same
moment as a time announcement.
To decrease
the figure To increase
the figure
+Scrolled display (Clock Options)
C i l o c k O p t
The following items can be selected by turning the
MULTI CONTROL jog dial.
(“CD Program Play”)
(“Recording Options”)
“Sound Options”
“Clock Options”
Adjust the clock before setting the timer.
m 8 : 0 0 a
ON/STANDBY
MENU SELECT
SELECT
SELECT
SELECT
m 8 : 4 5 a
÷ The display contents change according to the operation mode.