Kenwood KRF-V5080D - Manual (Page 31)

31 EN
In case of difficulty
Remote control unit
Symptom
Remote control operation is not possible.
Cause
• The remote control is set to a different
operation mode.
• Batteries are exhausted.
• The remote control unit is too far away from
the main system, controlling angle is too
large, or there is an obstacle between the
receiver and the remote.
• No tape or CD is placed in the source
component.
• An attempt is made to play a tape which is
being recorded in the cassette deck.
• The remote control has not been set to the
operation mode for the KENWOOD DVD player
you wish to control.
Remedy
• Press the any of the Input Selector keys to
select the appropriate operation mode.
• Replace with new batteries.
• Operate the remote control unit within the
controllable range.
• Place the tape or CD in the source component
which you want to play.
• Wait for recording to complete.
• Press the DVD POWER key for more than 2
seconds to activate the operation mode for
the KENWOOD DVD player you want to control
before operation.
ª
04.1.22, 1:25 PM 31