Kenwood KRF-V5080D - Manual (Page 26)

26 EN
DVD 6-channel playback
(KRF-V5080D only)
Using a DVD player or the like equipped with six (5.1) output channels and
this model, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
DVD/6CH
INPUT SELECTOR INPUT MODE
Preparations
• Connect your DVD player to the DVD/6CH jacks of this model.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”.
^
1
Select “DVD/6CH” as the input source.
2
Select "6CH INPT" by pressing the INPUT MODE key.
3
Start playback of the DVD software.
4
Adjust the volume.
• It is not possible to adjust the volume level or sound quality (SETUP,
SOUND, LISTEN MODE, ACTIVE EQ and TONE keys will not be
functional) of the channels separately when this model is in the
6CH INPUT mode. Adjust the volume with the controls of the DVD
player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
Ambience effects
= THEATER : DSP Surround THEATER mode.
~ STADIUM : DSP Surround STADIUM mode.
! DISCO : DSP Surround DISCO mode.
@ STEREO : Normal stereo playback.
• Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using this model’s current
settings is input, downmixing is performed to match the number of
available channels.
3
Adjust the volume.
Notes
• Depending on the type of the signal or speaker setting, some
listening modes cannot be selected.
• When playback is started, the sound may be cut or interrupted
before the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital surround (as well as all the other listening
modes) from a single component, be sure to use a Dolby Digital
compatible source component.
04.1.22, 3:27 PM 26