Kodak 7 - Manual (Page 9)

A-62032 November 1996 2-3
3. While holding the cassette, depress and spread the front paper
guide wider than the paper size to be used.
4. Slide the green resin plate of the right paper guide toward the
right side wider than the paper size to be used.
NOTE: Be sure to slide the resin plate and not to hold the lever
part, as that may bend it.
5. When you load the ledgerT size paper, slide the right paper
guide all the way to the right side and remove the lever by
depressing it from the both sides. And insert the edges of the
lever in the position shown in the illustration.
6. Align the stack of paper and set the paper in the cassette with
the sealed surface down. While holding the cassette, slide
and fit the front and right paper guides to the paper edges.
NOTE: Be sure to slide the resin plate to move the right paper
guide. Check that the top level of the paper does not
exceed the line marked on the rear paper guide.