beautypg.com

Kodak 7 User Manual

Page 26

background image

A-62032 November 1996

C-3

Error Codes (continued)

Code

Explanation

Action Needed

55

Elevator tray 2 malfunctioned.

Open paper cassette #2. Check paper position,
and close paper cassette. If the problem persists,
call for service.

56

Elevator tray 3 malfunctioned.

Open paper cassette #3. Check paper position,
and close paper cassette. If the problem persists,
call for service.

57

Elevator tray 4 malfunctioned.

Open paper cassette #4. Check paper position,
and close paper cassette. If the problem persists,
call for service.

58

The ozone fan malfunctioned.

Turn the printer off and then on again. If the
problem persists, call for service.

59

The power supply fan malfunctioned.

Turn the printer off and then on again. If the
problem persists, call for service.

80

There is a problem with the sorter.

Turn the printer off and then on again. If the
problem persists, call for service.

Preventive Maintenance Codes

Code

Explanation

Action Needed

P0

EP unit needs replacement.

Install a new EP unit*, or call for service.

P2

The toner collection bottle is full.

Replace with a new collection bottle. See
page 2-11.

Caution Codes

Code

Explanation

Action Needed

C0

The toner collection bottle is near full. The
printer will shut down approximately 500
prints after this error is posted.

Replace the toner collection bottle with a new
one. See page 2-11.

C1

The toner bottle is almost empty.

Replace the toner bottle with a new one.
See page 2-9.

C2

The fuser web is almost used up. The printer
will shut down approximately 500 prints
after this error is posted.

Replace with a new fuser unit* or call for service.

* These maintenance procedures are to be performed by Kodak authorized and fully trained persons only.

These errors (for the EP unit and fuser unit) normally appear every 150,000 prints. At this time, an Image
Quality Kit needs to be installed. This kit includes: a new EP unit, a fuser unit, a transfer/separator corona,
and feed rollers. Customers with a Shared Maintenance Agreement will install the Image Quality Kit. Other
customers should call Service immediately.