Kompernass FSM R1 - Manual (Page 12)

14 GB
Troubleshooting / Disposal / Information
Q Troubleshooting
c Danger!
J Wear protective
work gloves!
Fault
Cause
Cure
The appliance doesn’t work.
The electrical power supply is defective.
Check the connections of the appliance.
Arrange for the power supply to be checked
over by an electrician.
The extension cable or the power cable 6 is
damaged.
Provide for replacement and / or repair.
The fuse and / or the FI protection switch were
activated.
Eliminate the cause and, if necessary, arrange
for overhaul of the system.
The overload protection was activated.
Eliminate the cause.
Only take the appliance into use when it is undam-
aged. Increase the cutting height and if need be
tilt the appliance slightly when switching on.
The appliance is defective.
Arrange for repair and / or replacement.
The grass stems are not cleanly cut,
rather, they are crushed / torn.
The cutting height is set too low.
Increase the cutting height.
The curved blade bar
21 o is blunt / worn out.
Exchange the used curved blade bar 21 for a
new one.
The appliance generates loud noises
and / or vibrations.
The curved blade bar 21 o is incorrectly as-
sembled.
Re-assemble the curved blade bar 21 o correctly.
The curved blade bar 21 o is damaged.
Exchange the curved blade bar 21 for a new one.
Q Disposal
The packaging is wholly composed of en-
vironmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical tools
in your normal domestic waste!
According to EC Guideline 2002 / 96 / EG for
used electrical and electronic appliances, and its
adop-tion into national laws, worn-out electrical
tools must be separately collected and subjected to
an environmentally friendly recycling procedure.
Further information about the disposal of superan-
nuated appliances can be obtained from your local
community administration.
Q Information
Q Service
Details of the service centre responsible for your
country are contained in the warranty documentation.
J Have your device repaired only by qualified
specialist personnel using original manufactur-
er parts only. This will ensure that your device
remains safe to use.