Cooking in stages, Icrowave cooking – KITCHENAID KEMI301G User Manual
Page 16
16
1. Put food in oven and close the
door.
2. Set cooking time.
Example for 10 minutes, 30 seconds:
3. Set cook power.
Example for 50% cook power:
NOTE: During setup, if you want to
change the cooking time after setting the
cook power, wait for TIME to reappear
on the display, then enter the new
cooking time.
4. Start oven.
NOTES:
•
If you want to add more time during
cooking use EASY MINUTE. See
“Using EASY MINUTE” in the “Getting
to Know Your Microwave Oven” section
for more information.
•
If you want to change cooking time
after cooking has started, touch MICRO
and enter the new cooking time within
5 seconds.
When cooking time ends:
Four tones will sound, and the display will
show “End”.
TOUCH
1
0
0
CONTROL
LOCK
3
QUANTITY
QUANTITY
TOUCH
5
then
MICRO
COOK
POWER
TOUCH
E
ASY
M
INUTE
START
(display counts
down time)
M
icrowave Cooking
5. After cooking, open the door
OR
Four tones will repeat every minute until
you open the oven door or touch
CANCEL. This will clear the display.
Cooking in stages
For best results, some recipes call for one
cook power for a certain length of time, and
another cook power for another length of
time. Your oven can be set to change from
one to another automatically.
1. Put food in oven and close
the door.
2. Set cooking time for first cycle.
Example for 7 minutes, 30 seconds:
3. Set cook power for first cycle
(optional).
If you want to cook at full (100%) cook
power, go to Step 5.
Example for 50% cook power:
NOTE: During setup, if you want to
change the cooking time after setting the
cook power, wait for TIME to reappear on
the display, then enter the new cooking
time.
TOUCH
MICROWAVE OVEN
CANCEL
TOUCH
7
CONTROL
LOCK
3
0
QUANTITY
TOUCH
MICRO
COOK
POWER
then
5
4452303v10c103 8/13/98 5:28 PM Page 16