Konica Minolta IP-511 - Manual (Page 97)

Chapter 4 Control Panel Setup
4-19
7.
Touch the [PROOF PRINT] to print one copied set for proofreading.
8.
Touch the [Exit] to return to the print mode basic screen.
9.
Press [START] to resume the rest of the print job.
When you change the settings, press [STOP] to cancel the print job, and change the settings on the
printer properties on your computer.
How to check the job - Wait Mode - Wait:
This method is used only for confirming the settings on the control panel without printing.
On your computer:
1.
Right click the printer icon and then click the properties to display the printer proper-
ties dialog.
2.
Select [Wait Mode] from the upper list of [Features] in [Paper] tab of the printer prop-
erties window and select [Wait] from the list by clicking the [
▼] button of the lower
box of the [Features].
3.
Start to print.
On the control panel:
4.
The settings are displayed on the LCD.
The [Printer Check Mode Screen] will appear on the LCD touch screen and no printing is performed.
5.
Confirm the current settings.
Change setting values of [Print Quantity], [Duplex Mode] or [Image Shift], if necessary.
(Refer to the above mentioned procedure : How to check the job - Wait Mode - Proof, 6.)
6.
Press [START] button to resume the rest of the print job.
When you change the settings, press [STOP] to cancel the print job, and change the settings on the
printer properties on your computer.
HOME