Konica Minolta IP-511 - Manual (Page 91)

Chapter 4 Control Panel Setup
4-13
[Spool]
Select [Spool] to set the Spool condition.
Setting items are as follows:
• On : spool waiting print job queue within HDD
• Off : interpreter within the print controller processes the print job without spooling (Default)
[Job Time Out]
Select [Job Time Out] to set the Job Timeout value. When it reaches the job timeout value without receiv-
ing print job data or without any communication between the printing system and your computer, the print-
ing system ends the job.
Setting values are as follows:
• 5 / 10 / 15 / 20 / 30 / 60 (Default) / 120 / 180 / 240 / 300 (unit: seconds)
[Copier Time Out]
Select [Copier Time Out] to set the Copier Timeout value. When it reaches the Copier Timeout value after
operations for copy on the control panel of the main body printer, the print controller can receive print job
data.
Setting values are as follows:
• 15 / 30 (Default) / 60 / 90 (unit: seconds)
HOME