Konica Minolta IP-511 - Manual (Page 62)

Chapter 3 Printer Driver Functions
3-26
[Cover] Tab
Front Cover
You can select this setting when using a different paper for the front covers from that of the body of the
booklet (colored, for example). [Front Cover] inserts a sheet to the top of each set of copies as a Front
cover.
When [Front Cover] is checked, you can select [Printed] or [Blank].
[None], [Printed], [Blank]
Default is [None]
• When [Blank] is selected, nothing is printed on the front cover.
• When [Printed] is selected, the first page data is printed on the front cover.
None Printed Blank
[Front Cover] can not be performed in the following cases:
• When [Collate] is not selected in [Copies]
• When [2-in-1] or [2-in-1 Repeat] is selected in [Features] - [Combination]
• When [OHP-Interleave (Blank)] or [OHP-Interleave (Print)] is selected in [Media Type]
Front Cover - Tray
Specify the paper tray for the front cover.
The settings you can select are as follows:
[Bypass tray], [Tray 1], [Tray 2], [Tray 3], or [Tray 4(LCT)]
When [Front Cover] is not selected, [Tray] can not be performed.
HOME