Kenwood XD-DV75 - Manual (Page 24)

24
Operations
XD-DV series (EN/K,M,T,X,Y)/2
Playback of discs
Open the tray and place a disc
1
2
÷ The tray opens when the key is pressed and closes when the
key is pressed again.
DVD CD VCD
To pause playback
÷ Each press pauses and plays the disc alternately.
÷ With some VCD discs, return to the menu screen is
done with pause at the time of P.B.C. ON.
DVD CD VCD
To stop playback
REMOTE MAIN UNIT REMOTE MAIN UNIT
Close the tray
The label must be on top.
Disc number
2 1
3
Press the DVD/CD (
6 ) key
÷ Press the 7 key twice to cancel playback.
÷ Depending on the disc, playback may start automatically.
To change the disc of another tray dur-
ing playback, do the following.
1 Press the OPEN/CLOSE key.
2 Set the disc.
3 Press the OPEN/CLOSE key to close the tray.
The disc being played back remains as it is, while
the other discs can be exchanged.
Sequential playback from the first track or chapter
0OPEN/CLOSE
0OPEN/CLOSE
0OPEN/CLOSE
When a Disc Menu appears on the screen (DVD or VCD)
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
÷ Each press pauses and plays the disc alternately.
DVD/CD
6
DVD/CD
RESUME playback
When playback has been stopped while watching a movie, it may be desired to restart playback from the stopped part.
This unit memorizes the stop position even when the power is switched off, and when the unit is switched on again,
it is possible to continue playback from the previous stop position. This function is called the RESUME function.
When the
7 key has been pressed once during playback to stop the playback, and then playback is started again, play
will start from the point where the playback had been stopped. When the 7 key is pressed again during stop, the RESUME
function is cancelled.
RESUME is cancelled when 5 minutes have passed in RESUME status.
DVD/CD
STOP
7
STOP
Title number Chapter number
Elapse time
an example of DVD
DVD CD VCD
Select a Different Disc
REMOTE MAIN UNIT
DISC SELECTOR
DISC 1 DISC 2 DISC 3
1
DISC 1
2
DISC 2
3
DISC 3
SHIFT
The operation method may differ according to the disc.