Kenwood XD-DV75 - Manual (Page 18)

18
Preparations
XD-DV series (EN/K,M,T,X,Y)/2
The keys on the remote control unit with the same names as on the
main unit have the same function as the keys on the main unit.
1 Numeric keys fi
Disc selector keys (DISC1,
DISC2, DISC3)
KARAOKE keys (only XD-
DV75/XD-DV65/XD-DV55 for
some areas)
KEY CONTROL keys
ECHO keys
HIT MASTER key
2 Search (1, ¡)/TUNING
keys ∞
Skip (
4 4 4 4 4, ¢ ¢ ¢ ¢ ¢) /P.CALL keys
£
Stop (
7 7 7 7 7) key ¢
3 Cursor Up, Down, Left and
Right keys •
4 CLEAR key ›
RETURN key p
SELECT key (
ENTER key )
S.MENU (Smart Menu) key (
OSD (On screen display) key
›
TOP MENU key (PTY key for
only U.K. and Europe) i
MENU key (RDS key for only
U.K. and Europe) p
5 DISPLAY/AUDIO key fl
RANDOM/ANGLE key ‡
REPEAT/SLOW key ∞
A-B (A-B repeat)/STEP key
§
AUX/SUBTITLE key fl
L.MODE (Listen mode)/
(SUBTITLE) ON/OFF key fl
EQ (Equalizer)/EX. BASS/
DVD PGM (Program) key •
MUTE key ¡
6 SHIFT key
7 VOLUME (up/down) keys
¡
8 DVD/CD play pause (6 6 6 6 6) key
¢
TUNER/BAND key ·
TAPE A play/direction
( ™£ ™£ ™£ ™£ ™£) key e
TAPE B play/direction
( ™£ ™£ ™£ ™£ ™£) key e
9 POWER ( ) key
Power ON/OFF switching is
executed.
Loading batteries
2 Insert batteries. 3 Close the cover. 1 Remove the cover.
÷ Insert two R6/LR6 (“AA”-size) bat-
teries following the polarity indica-
tions.
÷ Align the poles (+ and -) properly
when inserting the batteries
Operation
Plug the power cord into the mains power outlet and
press the on/standby (
POWER) key of the remote
control unit to turn power ON. After the power has been
turned ON, press the desired key.
To turn power off, press the on/standby (
POWER)
key again.
÷When pressing more than one remote control keys succes-
sively, press the keys securely by leaving an interval of 1
second or more between keys.
Operating range (approx.)
Remote sensor
1. The provided batteries are intended for use in operation checking, and their service life may be short.
2. When the remote controllable distance becomes short, replace both of the batteries with new ones.
3. If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction
may occur. In such a case, change the installation position to avoid malfunction.
Infrared ray system
Operation of remote control unit
Notes Notes
/
1 2 3
4 5 6
7 8 9 BAND
0 1 ¡
4 ¢ 7 23
23
6
2 2
∞
CLEAR RETURN SELECT ENTER
S.MENU OSD TOP MENU MENU
DISPLAY RANDOM REPEAT A–B
AUX L.MODE EQ MUTE
POWER
DVD/CD
TUNER
DISC 1 DISC 2
KEY CONTROL
ECHO HIT MASTER – +
DISC 3
TAPE A TUNING
TAPE B STOP
RDS PTY
STEP SLOW ANGLE AUDIO
DVD PGM ON/OFF SUBTITLE
EX.BASS
SHIFT VOLUME
P.CALL
1
2
3
4
6
5
7
8
9
23 23 7
30º
30º
6m
/
SHIFT
Blink
Use of the SHIFT key
When a key corresponding to the SHIFT function is pressed within 5 seconds of pressing the SHIFT
key ("S" flashes on the display), a different function from the normal function will operate.
For example, when the REPEAT (SLOW) key is pressed after the SHIFT key, SLOW operation mode
will be reached. While the "S" indication is flashing, operation of the SHIFT function is possible
without pressing the SHIFT key.