Kenwood DPX-MP4070 EN - Manual (Page 35)

English | 35
Installation type 2
1
Attach Accessory9 which was assembled in
Assembly.
2
Remove the factory-installed car stereo and
install the unit.
Accessory9 is to be fixed either to the center or bottom,
depending on the car model.
Accessory3 3
(M5 × 7 mm) (M5 × 7 mm)
Accessory0
(M3 × 6 mm)
Accessory9
Accessory!
(M5 × 10 mm)
Factory-installed
car stereo
2
Remove the factory-installed car stereo and
install the unit.
Reuse the screws
that were removed..
Factory-installed
car stereo
Installation type 3
1
Attach Accessory@ to Accessory9 which was
assembled in Assembly.
Accessory Accessory3 3
(M5 × 7 mm) (M5 × 7 mm)
Accessory9
Accessory0
(M3 × 6 mm)
Accessory
Accessory@ Accessory
Accessory!
(M5 × 10 mm)
Accessory